Silicone hose/silicone tube/silicone elbow/Reducer/Silicone bellow/Silicone Grommet/Silicone Parts/Auto intake system

SILICONE HOSE,2-5PLY ,Metal wire reinforce,lined by fluorine.

100% export high quality.

Key words:Silicone hose,silicone tube,silicone elbow,Reducer,Silicone bellow,Silicone Grommet,Silicone Parts,Auto intake system

Silicon rubber, silicon fluorine silicone tube for car, modified car with a silicone tube, silicone tube car modification, car modification using silicone tube, fluorine silicon hose for automobiles, special-shaped silicone tube for car, three-way automotive silicone tube, T type car silicone tube, U-shaped silicone tube for car

Automobile silicone tube is used for conveying gas, liquid, paddle shaped or granular material, a kind of silicone rubber products, consisting of the inner and the outer rubber layer and the skeleton layer, skeleton layer material available cotton fiber, synthetic fiber, carbon fiber or asbestos, steel wire and so on. General motors of the silicone tube inner and outer layer material the use of natural rubber, styrene butadiene rubber or butadiene rubber, resistance to oil hose uses chloroprene rubber, nitrile rubber, acid and alkali resistant, resistant to high temperature hose adopts ethylene propylene rubber, fluorine rubber or silicone rubber. Because of its easy to bend, can buffer, light weight, and convenient to install and use, use is very extensive, such as agricultural irrigation and drainage, dredging the harbour in suction mud, planes, tanks, cars and many mechanical equipment hydraulic system, pneumatic system, fuel system use many silicone tube.

Silicon rubber hose inner layer directly under the transfer medium wear, erosion, and prevent the leakage and external protection layer skeleton layer from external damage and erosion, the skeleton layer is under pressure of the rubber hose layer to give strength and stiffness. Work stress depends on the material and structure of the skeleton layer. According to the framework material layer structure can be classified as all rubber hose (no fabric material), clip hose cloth (skeleton layer cloth layer), suction hose (cloth layer and a layer of metal spiral line), weaving hose (skeleton layer woven wire or fabric), winding hose (skeleton layer for steel wire or thread winding layer), knitted hose (skeleton layer is knitted fabrics) and short fiber rubber hose (short fiber and rubber blend pressure and). Which attract the rubber hose in the negative pressure, wire braided hose or winding hose can withstand 80 - 600MPa or even higher pressure.

Silicone tube for car production basic process for mixed rubber processing, cord (cord) and canvas processing, rubber molding, curing and so on. Different structure and different skeleton of the hose, the skeleton layer of the processing method and hose forming equipment. All rubber hose because it doesn't contain the skeleton layer, extruding hose can be, the cloth clamping hose to tape bag, adhesive layer forming machine will be used. Attract the rubber hose in the shape of the need to wrap around the metal screw thread wrapped in plastic, weaving and winding hose need to use a special fabric or winding machine, knitting hose need to use any loom, etc..

Performance of silicone rubber hose:

1 made by winding process, high density, will not produce "";

. aging performance is excellent, with oxygen resistance, ozone resistance, light, weather resistance, weak acid and alkali resistance, high and low temperature resistance, excellent electrical insulation, arc resistance, good physiological inert and physiological stability;

3 three layers of mesh reinforcement, use a long time under high temperature, no hardening, no cracks, no pipe explosion.

Automotive silicone hose applications:

Silicone hose in the car for the five major systems: cooling system, fuel system, refrigeration system, power steering system and brake system.

Parameters of silicon rubber hose:

Manufactor

AH Xingxu Rubber Parts Co.,Ltd.

Raw material

100% silica gel

Temperature resistance

-40~200 C s.

Diameter range

1.0-300mm

Diameter tolerance

0.5-3.0mm

Pressure

80mPa

hardness

30-80A

Proofing time

Within 3 days

Sample fee

Free of charge

Deliver goods

3-7 day

Product certification

ROSH FDA

Price

Negotiate

Advantages of auto silicon rubber hose factory:

1 select the United States, Japan, Germany and other high-quality imported raw materials, carefully prepared, from feeding, processing to the shipment of the establishment of a strict quality management system;

2. Have advanced high-speed dispersion machine, patented filter, dense smelting machine, grinding machine, extruder, calender, composite hose automatic line production equipment, etc.

3 equipped with a computerized curing instrument, wear tester, color difference meter, aging test box, computer tension machine and other sophisticated testing instruments;

4 single or small batch production flexible, can cooperate with production speed;

5 quality, stable, long-term customers, introduced to your new and old customers, so that your business is more broad.

Product Name

Silicone tube, also known as: silicone hose

Used as liquid, gas and other materials in circulation and coating carrier.

Common silicone rubber tubes are: medical silicone tube, food grade silicone tube, industrial silicone rubber tube, silicone shaped silicone tube, silicone hose fittings.

Medical silicone tube is mainly used for medical equipment accessories, medical catheter, the use of antimicrobial design, to ensure the safety of the use of

Food grade silicone hose for water dispenser, coffee machine diversion channel, and household electrical appliances waterproof line protection. Industrial silicone rubber tubes are used for special chemical, electric and other special environmental protection carrier flow, using special properties of silica gel

test method

Silica gel tube: can be used for a variety of carrier coating and diversion, in line with the level of environmental protection, the use of a wide range of health and hygiene, fighting against the fight against tearing. Methods: to determine the fire burn will produce, produce white remnants

Feature feature editing

Technical characteristics

Hardness: 70 + 5, the tensile strength is not less than 6.5.

Product color: transparent, white, black, red, yellow, green (also can be produced as required).

Temperature range: -40 - 300

Specification: diameter 0.5---30MM.

Surface properties: comb water, for many materials are not sticky, can play a role in isolation.

Electrical properties: in damp meets water or temperature increased, little change, even short combustion generated silica is an insulator, which electrical equipment continued to work, so the most suitable production of wires, cables, wiring.

Product features

Silicone rubber is a new kind of macromolecular elastic material, has excellent high temperature resistant (250-300 DEG C) and low temperature resistance (-40-60 DEG C) performance, good physical stability, and can withstand repeated harsh and sterilization conditions, has excellent resilience and small permanent deformation (200 DEG C for 48 hours not more than 50%), the breakdown voltage is (20-25KV/mm), ozone resistance, resistance to ultraviolet. Resistance to radiation and other characteristics, special silicone rubber with oil resistance. [1]

Performance characteristics

Characteristic：

Continuous use temperature range: -60 C ~ 200 c;

Soft, arc resistant, corona resistant;

Various specifications can be customized according to customer requirements.

The harmless non-toxic and tasteless

The high pressure, environmental protection

Standard color:

Black, red, blue, white, gray, green, transparent color (according to the requirements of the production of other colors).

Project

Company

Test standard

GA-1053

GA-1063

GA-1073

GA-1083

hardness

HA

6031-1998 GB/T

50 + 2

60 + 2

70 + 2

80 + 2

Appearance

translucent

translucent

translucent

translucent

Specific gravity (25 degrees C)

533-1991 GB/T

One point one six

One point one nine

One point two two

One point two three

Degree of plasticity

12828-1991 GB/T

Two hundred and fifteen

Two hundred and fifty-five

Three hundred and five

Three hundred and thirty-five

tensile strength

MPa

528-1998 GB/T

Seven point five

Seven

Seven

Seven

elongation

%

528-1998 GB/T

Four hundred and fifty

Four hundred and twenty

Three hundred and twenty

Two hundred

Tensile permanent deformation

%

528-1998 GB/T

Seven

Seven point five

Seven

Six

tear strength

KN/m

529-1999 GB/T

Twenty-one

Twenty

Twenty

Twenty

Resilience

%

1681-1991 GB/T

Fifty-three

Fifty-one

Fifty

Fifty

Linear shrinkage

%

17037-2003 GB/T

Three point two

Three point one

Three

Three

Volume resistivity

Cm.

1692-1992 GB/T

3.5 * 10

3 * 10

3 * 10

3 * 10

breakdown voltage

KV/mm

1695-2005 GB/T

Twenty-one

Twenty-one

Twenty

Twenty

Note: the above data for a compression molding after the test results.

Curing agent C-8, adding 2%, curing conditions 170 c * 5min * 15Mpa.

The results in the table are typical data for this type of product, each batch of products will have a certain deviation.

The difference between the PVC tube and the editor

Silicone rubber tube is a kind of rubber tube, oil resistant, heat resistant. Because the different kinds of rubber has many applications, commonly used rubber tube material of EPDM rubber tube, Cr, VMQ, FKM, IIR, ACM, AEM and and common structure with single, double, multilayer, enhanced and no enhancement.

Silicone hose is the biggest feature of temperature change -60 degrees to 250 degrees, but the cost is very expensive, PVC commonly used as a common water pipe, the temperature sensitive, cheap to have a taste for the general working environment, the hose is not required. Compression resistant silicone rubber hose can also be, PVC general, to see the wall thickness and diameter. These, that is, the difference between silicone tube and PVC tube.

Use domain

Silicone rubber hose is: environmental pollution, strict detection by RoHs, through the SGS, PAHs and eight heavy metal and other specifications of silica gel products 100% complete

Silica gel tube

Silicone tube (2 sheets)

Non-toxic, tasteless, wire of fine silica gel, silicone tube (article), resistant to high pressure silicon tube, gear shaped silicon rubber hose, sealant, shaped article, food grade (non-toxic) silicone tube (article), medical silica gel tube, medicinal silicone tube, weaving silicone tube for conveying a working pressure, liquid food, pharmaceutical and biological products. ), medical silicone rubber tube joint, silicone sealing tube, flame retardant tube (article), silicone foam tube (article), high temperature resistant silicone rubber hose; performance: high temperature resistant. Harmless non-toxic, tasteless, suitable for small household electrical appliances (coffee pot, kettle, irons, electric rice cooker, frying pan, sterilizer and drinking machine, pulp machine, bread machine, gas cooker, water heater, etc.) and electronics, automotive, medical and other machinery products supporting.

Product classification

EPDM rubber tube, silicone tube and a variety of rubber steel wire tube, wire cloth pipe clamp, EPDM clip hose wire, foam tube, high-temperature plastic tube, silicone tube, silica gel cloth and automotive compression resistant flame-retardant hose.

Application editor

Product application

1, transportation: the application of shipbuilding industry.

2, radio, electrical: telecommunications industry.

3, instrumentation, instrumentation industry applications.

4, the application of the aviation industry.

5 applicable to household appliances, lighting, medical, beauty salons equipment, etc..

purpose

Can be widely used in aviation, electronics, petroleum, chemical, mechanical, electrical, medical, oven, food and other industrial sectors of good electrical insulation sealing, liquid transport materials. Precision representatives, oil pipelines, household electrical appliances, sealing, drinking water pipeline seals, medicine, etc..

Food silicon rubber hose